 |
AH24C Heater for Photoelectric quad beam sensor
1. High efficient heat exchange design
2. Environment adaptive power control
3. Constant temperature controlled by electronic switch pulse
4. Triple temperature control and protection
|
1. Working Voltage: 12VDC
2. Power consumption: 6mA
3. Frequency: 100～10000Hz
4. dB/M: 2.5dB
5. IMPED: 600
|
1. Voltage: 9～15VDC
2. Working temperature: -10℃～50℃
3. Monitor area: ＜60㎡
4. Alarm output: NO/NC;
5. Material of shelf: ABS
|
1. Working Voltage: 12VDC
2. Voltage Range: 9 ~ 15VDC
3. Current: <200mA
4. Working Temperature: -20℃ ~ 60℃
5. Flashing Frequency: 150/Minute
|
TS103 Electronic Siren & Light
1. Voltage: 12VDC
2. Current: 200mAh
3. Sensitivity: 105dB/m
4. Tone frequency: 3.8kHz
5. Strobe color: red and blue (optional)
|
1. Voltage: 12VDC
2. Working current: 230 ~ 300mA
3. Sensitivity: 115dB/m
|
1. Special bracket for DT918, DT928 Detector
2. Material: ABS
3. Against rainy, snowy, humid, frosty, icy etc.
4. Prevent water, dust, UV and any lights interferences.
5. Save maintenance cost.
|
DT9FP2 Omni-directional Bracket
1. Special bracket for DT918, DT928, A6 Detector
2. Material: ABS
|
1. Special bracket for DT928/DT918 Detector
2. Material: Stainless Steel
|
1. Special bracket for DT918, DT928 Detector
2. Should along with DT9FP2 for ceiling installation
3. Material: ABS
|
SMB10 Omni-directional Bracket
1. Material: Plastic ABS
2. 360 vortical
3. Can be used for most dual-tech detectors or infrared detectors
|
1. Need to use with SMB10
2. Material: ABS plastic
3. Can be used for most dual-tech detectors or infrared detectors
