RASP-M2/JB3 Vibration Sensor

Features:

The vibration sensor RASP-M2 or RASP-JB3 must work together with vibration analyzer A6760, Because when the vibration sensor is triggered, it will generate an opening circuit in very short time. Since all international control equipments are designed to generate an alarm when it detects an opening circuit with close circuit protection in a preset time, the vibration sensor must be connected to a signal processor or analyzer. If without processor or analyzer, the potential intrusions may be ignored, or cause so many false alarms because the frequent opening circuit exceeds the preset threshold.

Specifications:

1. Operation Voltage: 12VDC
2. Maximum Operation Voltage: 60VDC
3. Maximum Contact Current: 20mA
4. Minimum Contact Current: 10mA
5. Pulse Output Time: 0.5m/s to 50m/s
6. Sensitivity adjustment: High, Middle and Low for Option
7. Dimensions: L45mm*H23.5mm*21.5mm (M2)
8. Vibration Sensor can be widely used in the applications such as wall, fence, barrier, grille, basement and ATM machine etc.

A-6760 Vibration Analyzer

Features：

The vibration analyzer A6760 can continuously monitor the weak, discontinuous or continuous vibration signal (such as knocking, striking, drilling, drilling, digging, cutting etc.) from the vibration sensor (such as RASP-M2, RASP-JB3), and then generate an alarm signal.

Specifications:

1. Power Input: 9 to 15 VDC /12mA
2. Sensitivity: adjustable
3. Alarm Output: NC, 12VDC/1A
4. Compatible vibration sensor: RASP-M2, RASP-JB3
5. Operation temperature: -30 ℃ to +50℃
6. Dimensions: H116*L48*W29(mm)