Overview:

The Bistatic Microwave Barrier is suitable for the perimeter protection of complicated applications, such as outskirts, border, airport, car park etc. It can even work normally at -40℃ to +65℃.
   


Features:
 

1. High-end outdoor perimeter microwave barrier which consists of transmitter (T) and receiver (R), and the detection range up to 228m (750ft)
2. Volumetric Barrier detection zone: Three-dimensional protection zone, not beams-liked zone
3. Microwave modulating detection technology and ultra-stable-frequency DRO microwave mode make the microwave barrier feature high sensitivity as passive detection and low false alarm rate as active detection
4. IP65 rated outdoor professional housing
5. Wide working temperature: -40ºC ~ 65ºC and relative humidity up to 100%
6. 4 crystal-controlled modulation channels for M-200MT to allow the detection zones of multiple barrier sets overlapped without crosstalk
7. Self-adaptive circuit: suitable for various complicated perimeter protection (such as long-range perimeter protection, uneven ground environment etc.)
8. Anti-environmental interference function: microwave sensitivity won’t be affected by heavy fog, rain, snow, etc.
9. Be immune to animals (such as birds, cats, dogs etc.) through its original method of false alarm elimination
10. Four Installation methods: can easily be installed on any type of fence or pole to provide a solid barrier protection and detect all probable perimeter intrusion

Specifications:
 

1. Microwave frequency: DRO microwave mode, 9.5/10.525GHz
2. Working channels: 4 channels
3. Detection sensitivity: High/Low 2 grades for option
4. Application of protection zone: outdoor 228m (750ft)
5. Maximum width of protection zone: 1.5m or 3.5m
6. Maximum height of protection zone: 2.5m ~ 4.5m
7. Ground unevenness: 0.3m
8. Height of obstacles: Grass 0.3m, snow 0.5m
9. Working temperature: -40°C ~ +65°C
10. Water-proof: IP65
11. Power supply: 10.5V ~ 24V/DC
12. Electric current: <36mA, 12V/DC (one set)
13. Alarm output: 3 seconds, NC & NO 28V/DC, 100mA (PhotoMos Relay)
14. Tamper output: NC, 28V/DC, max 300mA
15. Response speed: 0.1m/s ~ 10m/s (moving intruder speed)
16. Dimensions: 156.6 × 138.4 × 46.5mm
17. Weight (per set): 1.1kg